ROLLING 250

63mm – 250mm (2″ IPS – 8″ DIPS)

The Rolling 250 is based on the Rolling 28 and was built to be used with pipes with international metric measurements. Among its best features we find an interchangeable 4-jaw car, which becomes a 3-jaw car when removing the jaw and the skate to work in smaller spaces.

The Rolling 250 is also compatible with our DataLogger. We also have a combined unit (CU) for the fusion of side walls.

Download pdf

THE ROLLING 250 IN ACTION

Click on the photos and videos below to see how the Rolling 250 works

PARTS & ACCESSORIES FOR THE ROLLING 250

Highlighted substitution parts and accessories

Butt Fusion & Mitered Insert Sets

Surface hardened for longer life and are serrated for maximum grip.

DataLogger® 6

Collect and analysis of data on all your fusions

Blade Set/strong>

Spare facer blades. Facer Blade Set (4 Blades).Extended Life Facer Blade Set (4 Blades). Carbide blades for abrasive materials.

Facer Stand

Facer stand provides a convenient place to protect and store your facer out of the dirt and mud.

Heat Shield

For fusing two materials with different melt rates. Shields the faster melt rate materials from over melting.

Heaters

Heaters have a microprocessor control and a dial thermometer to monitor temperature. 220-240V, 50/60Hz, 1Ph Heater. 100-120V, 50/60Hz, 1Ph Heater.

Hot Tap Tool

Branch saddle tapping tool for polyethylene pipe.

Hydraulic Extension Hoses

Required for in-ditch fusion. 25ft Extension Hose Set (4 hoses).

Low Profile Rollers/strong>

Low profile rollers.

Pipe Support Stand

Height is adjustable to properly support, position and align pipe to be fused.

PolyHorse®

Pipe handling system that consists of a series of adjustable racks to store and help install pipe on the job site. Standard PolyHorse. PolyHorse with Power Assist.

PolyPorter®

Aids in lifting pipe into the fusion machine and also performs as a pipe stand.

Pyrometer Kit

Pryometer kit for accurately checking surface temperatures of heater. Measures surface temperature of heater.

Self-Centering Stub End Holder

Self-centering stub end holder to hold stub end for butt fusion.

Spare Heater Plate Kit

Heater plates have an anti-stick coating and are required for butt fusion.

Test Caps

Quick and easy air pressure testing of polyethylene pipe.

Toolbox with Tray

For organizing your inserts and adapters for safe keeping.

SPECIFICATIONS

MORE THAN 40 YEARS BEING THE STANDARD OF INDUSTRY

Our range of Rolling machines are easy to use and have been built with the best materials, which confers them with the highest quality and has been used to become the industry standard in fusion machines since 1975. All our machines of the Rolling range have wheels for your transport. These wheels are easily removed for use in the base. All the lamination models are built to make tube fusions from small 2 “IPS (63mm) tubes to 65” OD (1600mm) tubes with 88.00 Iba of fusion power. Thanks to the laminated you can do any kind of work.

NO LIFTING
REQUIRED

THE CHASSIS WITH WHEELS GIVES EASY WORK HANDLES

For longer pipes of medium and large diameters, this type of machine provides the necessary comfort in the workplace thanks to its portability. For each melting area the rolled machines are towed very simply, remaining stationary as they melt and the pipe rods are dragged.

LOTS OF MACHINE
POWER OPTIONS

GAS AND ELECTRIC MODELS AVAILABLE

For our most popular models, the 412 and 618, we have electric and gas models to power the heater, the facer and the hydraulic pump. This allows choosing the source of energy according to the specific needs of each workplace. Electric models need a power source, a separate generator, or power outlet. They are the best option when the work that is going to be done is inside, since it does not produce fumes. The gas models have a stand-alone generator and receptacles of 120V and 240V and are better for outdoor work.

* Gas machines are available for models 412 and 618.

DATALOGGER®
COMPATIBLE*

THE EASIEST WAY TO RECORD & ANALYZE ALL YOUR FUSION JOINT DATA

All of the medium- and large-diameter Rolling machines are compatible with McElroy DataLogger. This is a small handheld computer that is responsible for documenting and analyzing the key parameters that are happening throughout the merger process. Later all this data is used to verify that all steps and fusion procedures are adequate before installation. The joint DataLogger records can be stored and analyzed in Vault, our server on the Internet. This allows a better classification, faster and easier, a labeling and an exchange of joint records by machine, articulation, operator, device or work.

MACHINES READY
FOR THE DITCH

CARRIAGE CAN BE REMOVED TO WORK ON SMALL SPACES

All our laminating machines have a car with 4 jaws that can be easily removed to make mergers in ditches and small spaces. A fixed jaw and external skate that can be removed, transforming the machine into a 3-jaw car, more compact and small for other types of mergers.

LEADERS OF THE PLASTIC
PIPE WELDING INDUSTRY

MAXIMUM PERFORMANCE ALWAYS GUARANTEED

All Plastic Pipe Welding machines and equipment are specifically designed to withstand the most adverse conditions and climates. We guarantee that our machines will last for years. But if that were not enough for you, all our machines come with the maximum warranty period possible in the field of plastic welding, 5 years warranty.

ADITIONAL FEATURES

Rolling 28 Rolling 250 Rolling 412 Rolling 618 MegaMc® 824 MegaMc® 1236 MegaMc® 1648 MegaMc® 1600 MegaMc® 2065
Patented Centerline Guidance System for equal distribution of force around the joint
Industry standard semi-automatic hydraulic control system
DataLogger® compatible
Powerful hydraulic facer for facing the toughest pipe with ease
Advanced blade design for smooth face and long life
ISO-compliant industrial Teflon-coated heater plates
Hard-anodized aluminum wear surfaces for corrosion resistance
Removable 3- or 4-jaw carriage for close quarter use
Available in Combination Unit (CU) for sidewall fusion
Large capacity 2-stage hydraulic pump for cool oil at max operating pressure
Lightweight heater design with 45-degree handle to prevent overheating
Microprocessor-controlled heater  ✓  ✓
Thrust-bearing-equipped clamp knobs to minimize force required to clamp and round pipe
High-force cylinder machine available
Medium-force cylinder machine available
Low-force cylinder machine available
On-board generator for powering heater
Gas-powered models available
Hydraulic pipe lifts  ✓  ✓  ✓  ✓  ✓
Heater and facer can be easily converted to top-loading for confined spaces  ✓  ✓
Rugged outriggers for added stability  ✓  ✓
4-jaw carriage only  ✓
Hydraulic clamping available (standard on all MegaMc machines)  ✓  ✓  ✓  ✓  ✓  ✓
Hydraulic pivoting heater and facer
Removable fourth jaw for enhanced convenience in fusing prefabricated fittings onto the pipe
Automatic hydraulic heater stripping to improve open and close times  ✓
Get this product
2018-11-05T17:34:27+00:00