1LC

½” CTS – 1″ IPS (16mm – 34mm)

The 1LC is the best substitute for the Mini-Mc. You will notice a more predictable form of operating without loosing any of the numerous qualities the 2LC has. Like most of our welding machines, the 1LC has a heater, which will allow you to put the heater on the guide rods of the piece itself.

THE 1LC IN ACTION

Click on the photos and videos below to see how the 1LC works

ACCESSORIES FOR THE 1LC

Highlighted substitution parts and accessories

Butt Fusion Mitered Insert Sets

Can only be used for one size pipes less than 1” IPS. Inserts are serrated to assure a better grip.

Briefcase

Ultra resistant box case. You can keep your 1LC, a heater, heater sling, inserts and facer.

Knife-edge set

This set includes two blades, screws to attach and a jerk.

Insulated Heater Splint

If you want a constant perfect temperature our sling will protect and maintain your heater temperature.

Pyrometer Gear Kit

For a more precise temperature measurement, our pyrometer gear kit will always give you the exact surface temperature.

Screwdriver Gear Kit

Extra gear kit with screwdriver, insert screws and wire brush ideal for cleaning your inserts and serrated jaws.

Tube Cropper

Used for cutting plastic pipes

Extra Facer

Extra facer piece for face tube ends

Auxiliary Heaters

In order for a total temperature control, our heaters have a dial thermometer and a microprocessor controller.

SPECIFICATIONS

MANUAL

JUST ONE OPERATOR: THE EASIEST WAY FOR FUSION WELDING

Manual fusion machines give you all the muscle needed to do precise fusions on the hardest conditions all day long. Resistant and trustworthy, this fusion welding machines are compact, lightweight and only precise of one operator to be handled. Our precise engineering machines provide a total integrity with a really low maintenance.

BEST QUALITY
& CONSISTENCY

UNIFORM SUPPLY OF FOCES THANKS TO THE CENTERLINE GUIDANCE

All McElroy Machines have a Centerline Guidance a patented technology which creates an equal distribution of forces. This technology ensures that the center lines of the clamping jaws of the tubes are located in the same plane as the pipeline itself. As a result, we will obtain a high quality union provided by the equal force that is distributed by the center of the diameter of the tube during the fusion.

PLASTIC PIPE WELDING
HAS SEVERAL MACHINE OPTIONS

BUTT FUSION CHOICES FOR ½” CTS TO 6″ DIPS PIPE

In Plastic Pipe Welding we have a wide variety of small and light machines for butt fusion tubes ranging from 1/2 “CTS to 6” DIPS (16mm to 180mm). With only one machine you can weld tubes of all sizes, since all our individual machines cover the entire range of existing pipe diameters.

FUSIONS AND
WORKS

MACHINES DESIGNED SPECIFICALLY FOR A GOOD EASE OF USE

Our machines are so light and compact that you will not have any problem using them wherever you want. On the ground or inside the trench, they will always yield the most. All our machines are coated with hardened aluminum at the surface, which provides them with an extra resistance to the most adverse conditions and the most extreme climates. For manual fusion, our machines have a narrow clamp that will help you align the pipes when welding.

LEADERS OF THE
PLASTIC PIPE WELDING INDUSTRY

MAXIMUM PERFORMANCE ALWAYS GUARANTEED

All Plastic Pipe Welding machines and equipment are specifically designed to withstand the most adverse conditions and climates. We guarantee that our machines will last for years. But if that were not enough for you, all our machines come with the maximum warranty period possible in the field of plastic welding, 5 years warranty.

ADITIONAL FEATURES

Mini-Mc® 1LC 2LC 2CU Pit Bull 14 Pit Bull 26
Hand-operated
Thermostatically-controlled heater to provide constant fusion temperature
ISO-compliant industrial Teflon-coated heater plates
Patented Centerline Guidance System for equal distribution of force around the joint
Hard-anodized aluminum wear surfaces for corrosion resistance
Thrust-bearing-equipped clamp knobs to minimize force required to clamp and round pipe
Narrow clamp design for precise pipe alignment
Narrow clamp design for precise pipe alignment
Serrated jaws and inserts keep pipe from slipping during fusion
Conventional facer design features ball-bearing construction and gear drive for long life
Locking cam to maintain force during the cooling cycle
Compact and Durable
Sidewall capabilities for 1/2″ to 2″ fittings
Get this product

MODELS

Select a machine below for more detailed specifications and model-specific features.

2018-05-15T15:35:47+00:00